Product Description

Ⅰ.Product Overview:
Using BYD E5 battery electric vehicle power steering physical basis, including steering machine, servo motor, steering column, steering wheel, steering front axle, tires, etc., suitable for middle and higher vocational colleges and training institutions to teach the principle of battery electric vehicle power steering system.

Ⅱ.Functional Features:

1. Knowledge of BYD E5 battery electric vehicle EPS electric power steering system, and conduct teaching practical training for the composition and the working process of the electric power steering system .

2.Show and learn, and conduct practical training on the following knowledge points: the functions and characteristics of electric power steering, the working principle of EPS, the common faults and diagnosis methods of electric power steering,etc..

3.Configure the intelligent fault assessment function: it mainly consists of two independent systems, the teacher fault setting terminal and the student answer terminal, which are installed on the mobile terminal. Teachers can use mobile teaching terminal to connect with the fault setting module of integrated teaching AIDS for fault setting. After the fault setting is completed, students can use the mobile learning terminal to carry out the examination and answer questions. After the examination, the score is automatically stored in the module, which is convenient for the teacher to query the score of each student.

4.In order to facilitate the identification and measurement of sensors and actuators, and to reduce plug damage caused by plug removal and insertion of sensors and actuators while restoring the detection scene of the real car, a detection end ≥5cm is required to be placed in parallel beside the plug of the original car wiring harness, and the detection end is made of transparent Acrylic material by laser engraving and flat jet painting, with the same shape as the plane shape of the original car plug. The measuring end adopts a special detection terminal, and marks the number of the measuring Angle and the name of the sensor and actuator. The electrical signals of each sensor, actuator and control unit pin can be detected directly on the measuring terminal, such as resistance, voltage, current and frequency signals. With the help of multimeter and oscilloscope, the parameter changes under various states can be detected in real-time.

5.The Training platform frame is assembled by European standard aluminum profile , solid and reliable never change color.  There are 4 casters installed at the bottom of the platform frame ,so it is flexible movement, while the casters with self-locking device, so position can be fixed.

6.The panel of the training platform is printed with circuit diagram and configured with detection port. With the help of multimeter and oscilloscope, the parameter changes under various states can be detected in real time.

7.The Training platform is equipped with training instructions manual.

Ⅲ.Technical Parameters.

1.Working temperature:20～60℃

2.Low voltage control power supply: DC12V

Ⅳ.Training Purpose.

1. Show the voltage and current data changes of the sensor during the steering process;

2. Show the operation mode and principle of the motor during the steering process;
3. Master the detection methods of position sensor, torque sensor, speed sensor and Angle sensor;
4. Master the detection method of coil insulation of steering motor (DC motor);
5. Master the detection method of motor temperature sensor, current and voltage sensor of motor controller;
6. Demonstrate the critical protection function and overheat protection function of electric power steering system.

Payment Terms︰ TT

Product Image